Configuring 3d/video + key – Grass Valley K2 AppCenter v.9.0 User Manual
Page 206
•
A 3D/Video+Key player channel does not support offspeed play greater than 1 or less than -1.
During these offspeed play operations the video is not synchronized between the two video tracks.
However, both video outputs will resync when recued.
•
Super Out is not supported on a channel configured for 3D/Video + Key.
•
3D/Video + Key is not compatible with TimeDelay.
•
One or more 3D/Video + Key channels can be a part of an AppCenter channel gang, but the
“Record/play same clip on all channels of Gang” feature is not available for that gang.
Configuring 3D/Video + Key
This feature is part of the ChannelFlex Suite, which requires the AppCenter Elite license.
1. Open Configuration Manager, click
Channel
, and select a channel tab.
2. For Type, select
3D / Video + Key Recorder
or
3D / Video + Key Player
.
3. If you selected
3D / Video + Key Recorder
, enter names as follows:
a) For Name, enter a name to identify SDI IN1.
b) For Aux Name, enter a name to identify SDI IN2.
4. If you selected
3D / Video + Key Player
, enter names as follows:
a) For Name, enter a name to identify SDI OUT1.
b) For Aux Name, enter a name to identify SDI OUT2.
5. Configure remaining channel settings as appropriate.
206
K2 AppCenter User Manual
29 October 2012
ChannelFlex Suite