Grass Valley K2 AppCenter v.9.0 - Manual (Page 64)

Before you record: Recorder settings checklist on page 61
Using Fixed Length record mode
You can specify the clip length before recording, or during recording. As long as there is sufficient
storage space, a fixed length recording continues until the clip length is reached or until you select
stop.
1. Verify video, audio, and other settings for your recording.
2. Select Length in the Recorder pane.
The Length dialog box appears.
3. Enter the clip length by typing only numbers, colons are added automatically.
4. Choose OK in the dialog box, or press Enter .
5. Select the record button on the onscreen transport controls.
Recording continues until Stop is selected or the desired length is reached. While recording, the
mark in and mark out update with the current status of the clip. The Time Dome gives a visual
indication of the percent complete as well as a countdown from the specified length down to
00:00:00:00 .
Related Topics
Before you record: Recorder settings checklist on page 61
Specifying clip length after recording has begun
While a clip is recording you can enter the clip length as follows:
1. Select Length in the Recorder pane.
The timecode dialog box appears.
64 K2 AppCenter User Manual 29 October 2012
Recording Clips