Selecting multiple assets, Moving an asset to another bin, Using the cut and paste commands – Grass Valley K2 AppCenter v.9.0 User Manual
Page 128: Using send to
Selecting multiple assets
You can select multiple assets in the Clips pane as follows:
•
Select
Clips | Select All
.
•
Using mouse and keyboard, hold the SHIFT or CTRL key on the keyboard while selecting
multiple assets with the mouse or arrow keys.
Moving an asset to another bin
There are two ways to move an asset to another bin: Using Cut/Paste or the Send To dialog box.
Using the cut and paste commands
1. Select the asset(s) in the asset list.
2. Cut the asset to the clipboard using one of the following:
•
Select
Cut
in the asset context menu.
•
Select
Edit
in the AppCenter main menu, then choose
Cut
.
•
Use keyboard shortcut
Ctrl + X
.
3. Change the current bin to the target bin.
4. Paste the asset(s) from the clipboard to the current bin.
The Paste operation is accessed in the same way as Cut.
NOTE: If an asset is locked or currently being recorded, it remains in the existing bin while
the remaining assets are moved to a new bin with the specified name.
Using Send To
1. Select the asset(s) in the Asset List.
2. To open the Send To dialog box using do one of following:
•
Select
Clips | Send To
.
•
Select
Send To
in the asset context menu.
•
Click the
Send To
button in the Clips pane.
If the Send To button is not displayed in the Clips pane, refer to assignable buttons in the Guide
to using the Clips pane section.
The Send dialog box appears.
3. Click the Bin tab.
4. Select
Move to
in the right-hand drop-down list.
5. Select the target bin name.
128
K2 AppCenter User Manual
29 October 2012
Managing clip media