Grass Valley K2 AppCenter v.9.0 - Manual (Page 66)

Previewing a clip that is recording
Preview loads the currently recording clip into a play channel. The play channel becomes the selected
channel, and the clip is cued and ready for play.
To preview a clip:
1. Start the record process.
2. Preview the clip:
a) In the Monitor pane, use the drop-down list to select the Player application.
b) Drag the clip thumbnail from the channel running the Recorder application to the channel
running the Player application.
The play channel becomes the selected channel, and the clip is cued and ready for play. If a play
channel is already playing a clip, no warning message is displayed in the status bar.
3. To play the clip, select the onscreen transport controls.
Using cue points while recording
Cue points enable you to move quickly from one frame to another in a clip. You can use cue points
to manage clip play out or create subclips. You can add, remove, or rename cue points while a clip
is being recording.
To add a cue to a clip while the clip is recording, you need to begin the recording while in Control
mode. Once the recording has begun, you can switch to Cue mode and modify the clip with cue
points.
Adding a cue point while recording
NOTE: While the clip is record mode, do not use the transport controls.
1. Select Player/Recorder from the application drop-down list.
2. Begin recording.
3. In the Record pane, click on the Cue tab. The Cue view displays.
4. Do one of the following:
• Click the Add Cue button.
• Select Control | Add Cue .
A cue point is added to the cue list using a unique name, e.g. Cue_1.
Related Topics
To record a clip on page 63
Scheduling a recording on page 63
Scheduling a clip to play on page 81
66 K2 AppCenter User Manual 29 October 2012
Recording Clips