Grass Valley K2 AppCenter v.9.0 - Manual (Page 60)

Description and User Operation Control
Load Clip – Opens the Load Clip dialog box. (Only available on the
SD-00 K2 Summit Production Client)
New Clip – Used to create and name clip prior to starting the recording.
If a clip is already loaded, selecting New Clip ejects the current clip
and creates a new one.
Schedule Start Time – Opens the Trigger At entry box so a start time
can be entered.
Locate – Locates the currently loaded clip in the Clips pane.
Properties – Opens the Properties dialog for the currently loaded clip.
Auto Subclips – The auto subclip check box changes the way that the
subclip mode behaves. When it is NOT checked, clips have to be
accepted manually. When it is checked, a subclip will be created as
soon as you set a mark out.
Widescreen – Sets the channel for recording widescreen format. (720p
and 1080i clips are always recorded in widescreen, whether this is
selected or not.)
E-to-E (LoopThru) mode – When selected, the following occurs: “EE”
is displayed on the channel pane, next to the Timecode Source
indicator; when no clip is loaded, the signal that is currently present
at the channel input is passed through; when a record operation stops
the clip remains in the Recorder. The signal that is currently present
at the channel input passes through (video, audio, and timecode).
Recorder Control
menu
Related Topics
Changing the timecode source on page 67
Changing the current bin on page 69
Using Fixed Length record mode on page 64
Guide to using the Recorder/Player application: Cue view
60 K2 AppCenter User Manual 29 October 2012
Recording Clips