Grass Valley K2 AppCenter v.9.0 - Manual (Page 171)

Configuring record channel audio settings
On the K2 Summit/Solo system, available settings change depending on the audio input selected,
as in the following sections.
AES/EBU audio settings
1. In AppCenter, click System | Configuration .
Configuration Manager opens.
2. Click Channel , and select a player/recorder channel.
3. For Audio input type , select AES / EBU .
4. Configure as follows:
Configure as needed... For this setting...
Select the number of inputs. Settings below change, based on your
selection. Number of audio inputs
Select the input format. A1/A2 input format
Select the input format. A3/A4 input format
Between -200ms and +200ms. The default value is 0 ms. Timing offset
Add tags for languages or other purposes to this channel's audio tracks. Audio Input Tags
Select System | Monitor Options , select the Display the Following Channel
Status radio button, and check the Audio Monitors box.
Display audio meters
Related Topics
Adding audio tags on page 193
Embedded audio settings
1. In AppCenter, click System | Configuration .
Configuration Manager opens.
2. Click Channel , and select a player/recorder channel.
3. For Audio input type , select Embedded .
29 October 2012 K2 AppCenter User Manual 171
Audio/Video Configuration