Displaying super out information on output/monitor – Grass Valley K2 AppCenter v.9.0 User Manual
Page 91
Displaying Super Out information on output/monitor
If licensed for AppCenter Pro or Elite, you can display information on a channel’s SDI OUT2 signal
and on the VGA video monitor.
1. Click
System | Monitor Options
.
The Monitor Options dialog box opens.
2. Select the tab for the channel that plays the video with the information you are displaying.
3. Do one or both of the following:
•
To display information on the VGA video monitor for the channel, select the checkbox above
Monitor
.
•
To display information on the channel’s SDI OUT2, select the checkbox above
SuperOut
.
4. Select the checkbox for each type of information you are displaying.
5. From the drop-down list, select the location to display the information.
6. Configure other channels as follows:
•
To configure other channels with the same settings as the current channel, click
Copy to
.
•
To configure other channels with their own settings, repeat previous steps as appropriate.
7. When fully configured, click
OK
to apply settings and close.
29 October 2012
K2 AppCenter User Manual
91
Playing and editing clips