Grass Valley K2 AppCenter v.9.0 - Manual (Page 80)

Description and User Operation Control
Add Cue – Used to add a cue to a clip: In the Control view,
start the clip playing. Select the Cue tab. At the desired timecode,
select Control | Add Cue.
Remove – Used to remove a cue.
Rename – Used to rename a cue.
Create Clip – Creates a sub clip from highlighted cue points.
Create All – Creates sub clips from all cue points.
Cue Selection – Cues the first selected cue point for playback
showing a still frame of video for the cue point.
E-to-E (LoopThru) mode – When selected, the following
occurs: “EE” is displayed on the channel pane, next to the
Timecode Source indicator; when no clip is loaded, the signal
that is currently present at the channel input plays out; when a
record operation stops the clip remains in the Recorder. The
signal that is currently present at the channel input plays out.
Player Menu
Loading media for playout
You can load clips or programs in the play display for playout.
NOTE: Loading a clip from a bin into a play channel changes the working bin for that channel.
Loading clips from the clips pane
1. Select a play channel by clicking in the channel’s monitor pane.
2. Locate the clip in the clips pane. If necessary, change bins by clicking the current bin control
and selecting from the drop-down list.
3. Load the clip in one of the following ways:
• Drag the clip from the clips pane into the play channel.
• Choose the Load button in the clips pane, then select the clip.
• Double-click on the clip.
• Select the clip, then press Enter on the keyboard.
Loading a clip from the Player application
1. Select a play channel by clicking in the channel’s monitor pane.
2. Open the Load Clip dialog using one of the following:
• Click the Load button in Player.
• Select Control | Load .
80 K2 AppCenter User Manual 29 October 2012
Playing and editing clips