Grass Valley K2 AppCenter v.9.0 - Manual (Page 84)

A cue point is added to the cue list using a unique name, e.g. Cue_1. Using the preview feature, you
can play and add cue points to a clip while it is still being recorded.
Related Topics
Adding a cue point while recording on page 66
Removing a cue point
1. In Cue view, select a cue point in the list.
2. Do one of the following:
• Click the Remove button.
• Select Control | Remove .
Jump to the selected cue point
Use the following steps to jump to the selected cue point.
1. In Cue view, select a cue point in the list.
a) Click the Goto button, then select Selection .
2. Press the Play button on the onscreen transport controls.
Playout starts from the cued frame.
Jump to the next cue point
Use the following steps to jump to the next cue point. Depending on the current play position, the
clip will cue to the next cue point in the clip.
1. In Cue view, click the Goto button, then select Next Cue .
2. Press the Play button on the onscreen transport controls.
Playout starts from the cued frame.
Renaming a cue point
1. In Cue view, select a cue point in the list.
2. Select Control | Rename.
3. Use the text entry dialog to enter a new cue name, then click OK or press Enter .
Editing a clip
Topics in this section describe the process of editing a clip.
84 K2 AppCenter User Manual 29 October 2012
Playing and editing clips