Grass Valley K2 AppCenter v.9.0 - Manual (Page 35)

Description Startup Error
Your user name or password is not valid for this K2 Summit/Solo system.
Remember that the password is case sensitive.
• Click Ignore to view the AppCenter channels. If working remotely, you
will see the channels from the last-used channel suite. Or,
• Click Retry to enter the login information again. Or,
• Click Abort. If you are accessing AppCenter through a
network-connected Control Point PC,
Abort lets you try to create a new
channel suite. If you are accessing AppCenter locally, it lets you exit
to Windows.
For assistance with your user name or password, consult your Windows
administrator.
Log on failed
The K2 Summit/Solo system might be offline or have had difficulty with
the start up checks. There are various reasons why AppCenter is having
difficulty connecting to the K2 Summit/Solo system; for example, the error
might say there is no file system or that the K2 Summit/Solo system has
been taken offline for maintenance.
• Verify that the host name or IP address is correct and see if you can
correct the problem.
• If working locally, reboot the K2 Summit/Solo system. If working from
a network-connected Control Point PC, select
System | Reconnect from
the AppCenter System menu.
:
Viewing AppCenter system status messages
System status messages are displayed in the AppCenter status bar. There are two types of system
status messages, as follows:
• Channel status messages — In normal operation, this type of message displays the current
operating status of the selected channel.
• System error messages — If a problem develops with the system software or a hardware
subsystem, this type of message is displayed for approximately 5 seconds. Afterward, the display
returns to the channel status message and the error message is written to the status log file. When
a message is written to the status log, a Status Icon indicates the severity of the message.
Status bar
System status messages appear in the AppCenter status bar, which is located across the bottom of
the AppCenter window, and consists of a message area, several tool buttons, and a status icon. The
button icons appear only when the related function is active. In the position of the StatusPane button,
status icons appear.
29 October 2012 K2 AppCenter User Manual 35
Getting Started