Grass Valley K2 AppCenter v.9.0 - Manual (Page 168)

3. Configure settings as follows:
Configure as needed... For this
setting...
Choose NTSC or PAL . Reference
Standard
Determine status of Reference present .
• Green LED — source present
• Black LED — source not present
Determine status of Reference locked .
• Green LED — system locked
• Black LED — system not locked
Related Topics
Active Format Description (AFD) specifications on page 237
Configuring data track settings on page 175
Configuring reference file type on a standalone K2 Summit/Solo system
1. In AppCenter, click File | System | Configuration .
Configuration Manager opens.
2. In Configuration Manager, click the System tab.
3. In Reference Files settings, for the Reference file type setting, select one of the following:
• None — K2 software does not create reference files.
• QuickTime — K2 software creates QuickTime reference files.
• MXF — K2 software creates MXF reference files.
4. Click OK to apply the setting.
5. Restart the standalone K2 Summit/Solo system to put the change into effect.
About tri-level sync
The K2 Summit/Solo system supports tri-level sync as a genlock reference source. The reference
must be in an HD format and frame rate that is supported by the K2 Summit/Solo system, as follows:
• Reference Standard: NTSC (59.97Hz)
• 1080i 29.97
• 720p 59.94
168 K2 AppCenter User Manual 29 October 2012
Audio/Video Configuration