Grass Valley K2 AppCenter v.9.0 - Manual (Page 34)

• Storage Utility messages — While you are using Storage Utility, pop-up message boxes inform
you of the current status of the storage system.
Related Topics
Viewing AppCenter system status messages on page 35
Critical system startup messages on page 34
Critical system startup messages
The following messages appear in the AppCenter system startup message box as critical subsystems
are checked during startup processes. If a critical failure is detected, the K2 Summit/Solo system is
rendered inoperable and the failure message appears.
Failure messages Critical subsystem check messages
Startup error System Startup
Missing or bad hardware
A real time processor is not functioning correctly
Hardware fault Checking hardware…
One or more media disks failed to initialize Checking media disks…
Missing or bad hardware
Missing or bad database
No file system is running Checking file system…
Database fault Checking database…
A real-time system failed to initialize Checking real-time system status…
Failed to synchronize configurations Updating configuration…
Unable to communicate with Starting services…
AppCenter startup errors
If you start AppCenter and the K2 Summit/Solo system is not running, or your login information is
not correct, you will see a Startup Error message.
The following table describes the two most common startup error messages.
34 K2 AppCenter User Manual 29 October 2012
Getting Started