Grass Valley K2 AppCenter v.9.0 - Manual (Page 253)

MXF export behavior on K2 systems
Upon MXF export the K2 system checks clip structure for specifications as they apply to industry
standard formats such as XDCAM and eVTR style D10AES3. If specifications match, the media is
exported as the appropriate format.
The K2 system allows you to configure channels so that they no longer match the specifications for
the industry-standard format. For example, you can add audio tracks to exceed the “# of Audio
Tracks” specification for a D10AES3 channel. If you alter a clip in this way, on MXF export the
K2 system exports the clip as MXF OP 1A but it is not the same eVTR style of MXF.
About MXF with DIDs and SDIDs
You can import and export MXF containing ANC packets and VBI lines as specified in SMPTE
ST 436. The K2 system extracts the ANC packets or VBI lines to the K2 clip's data track.
AVI interchange specification
This specification applies to AVI file import on K2 Summit, Solo, and SAN systems.
AVI supports simple clips with a single video track only.
Formats are supported are as follows:
Notes Supported formats
Type-2 (non-interleaved) DV video only DVCPRO25 Video
DVCPRO50
DVCPRO HD
DVCAM
Audio tracks handled as stereo pairs 48 kHz Audio
16 bit, 24 bit PCM
— None Data
Interchange mechanisms are supported as follows:
Support Mechanism
Yes Import File based
No Export
No Import FTP stream
No Export
QuickTime interchange specification
This specification applies to QuickTime file transfer, import, and export on K2 Summit, Solo, and
SAN systems.
29 October 2012 K2 AppCenter User Manual 253
Specifications