Grass Valley K2 AppCenter v.9.0 - Manual (Page 63)

To record a clip
Topics in this section provide instructions for recording a clip.
Using New Clip record mode
To create and name a clip before recording starts:
1. Verify video, audio, widescreen, and other settings for your recording.
2. Select New Clip to create and load a clip.
3. To rename the clip, select the default clip name , then enter a new clip name.
If a Multi-Cam channel, you can name both clips.
4. Select the record button on the onscreen transport controls.
The recording progresses until you select Stop .
Related Topics
Before you record: Recorder settings checklist on page 61
Using Crash record mode
Crash record occurs when you start a recording without specifying a clip name. The clip is given a
default name, then the recording continues until you select stop.
To crash record:
1. Verify video, audio, and other settings for your recording.
2. Select the record button on the onscreen transport controls.
The recording progresses until you select Stop .
Related Topics
Before you record: Recorder settings checklist on page 61
Scheduling a recording
This feature is part of the licensable AppCenter Pro option.
You can schedule a recording to start at a specified time. Scheduled Start Time uses Time of Day
timecode source, which can be driven by either the system clock or LTC. VITC or Anc VITC/LTC
cannot be used to drive the Time of Day.
1. Select Control | Schedule Start Time .
Trigger at entry box appears.
2. Enter the time when you want the recording to start and click OK .
The time of day, trigger time, and a countdown are displayed.
Related Topics
Scheduling a clip to play on page 81
To record a clip on page 63
29 October 2012 K2 AppCenter User Manual 63
Recording Clips