Grass Valley K2 AppCenter v.9.0 - Manual (Page 175)

3. Configure as follows:
Configure as needed... For this setting...
Select None or Groups 1, 2, 3, 4 . Embedded output
group(s)
Between -200 ms and +200 ms. The default is 0 ms. Timing offset
Add tags for languages or other purposes to this channel's audio tracks. Audio Output Tags
Select System | Monitor Options , select the Display the Following Channel
Status radio button, and check the Audio Monitors box.
Display audio meters
Related Topics
Adding audio tags on page 193
Adjusting play speed options
1. In AppCenter, click System | Configuration .
Configuration Manager opens.
2. Click Channel .
3. Click Panel .
4. Configure as follows:
Configure as needed... For this setting...
Playback advances or retards one frame at a time according to the
direction of the setting. Jog speed
Sets the speed for shuttle play or playback. Shuttle speed
Variable speed play. Specify the play speed; otherwise, the speed
remains at the preset play speed or the last variable play speed used. VAR setting
Initial play speed can be set to start at the preset speed. Always start at VAR
preset
Configuring data track settings
Do not configure these settings unless you are qualified and understand your system's data track
requirements. Consult with Grass Valley for recommendations.
1. In AppCenter, click System | Configuration .
Configuration Manager opens.
2. Click Channel , and select a player/recorder channel.
3. Select a video input format.
4. Scroll down and locate Data Track settings.
29 October 2012 K2 AppCenter User Manual 175
Audio/Video Configuration