Grass Valley K2 AppCenter v.9.0 - Manual (Page 240)

Default generated AFD values
Default AFD values are generated when the three following conditions are met:
• The AFD output setting in the Configuration Manager is set to Always
• The clip does not have AFD in the data track, and
• The clip does not have AFD specified in its clip properties
Under these conditions, default AFD is generated and inserted, based on ARC performed and the
source material format. Default generated AFD settings are described in the table below.
Default generated AFD values when up-converting to HD
Source image is presumed based on the conversion that has been selected.
Converted image Converted AFD
and aspect ratio Conversion
option Presumed source image Source aspect ratio
AFD = 1010
AR = 16:9 HD
No conversion 16:9 HD
AFD = 1010
AR = 16:9 HD
“crop”
Scale up
Crop vertical
16:9 SD
AFD = 1010
AR = 16:9 HD
Scale up
AFD = 1011
AR = 16:9 HD
“half bars”
Scale up
Crop vertical
Pillarbox
AFD = 1011
AR = 16:9 HD
“bars”
Scale up
Pillarbox
4:3 SD
Default generated AFD values when down-converting to SD
Source image is presumed based on the conversion that has been selected.
Converted image Converted AFD
and aspect ratio Conversion
option Presumed source image Source aspect
ratio
AFD = 1001
AR = 4:3 SD
No conversion 4:3 SD
not widescreen
240 K2 AppCenter User Manual 29 October 2012
Specifications