Grass Valley K2 AppCenter v.9.0 - Manual (Page 111)

8. When finished, click the Apply All button. (If you click OK , the dialog box closes without saving
any changes.)
To add transitions to all events in a playlist
The AppCenter Pro handles transitions made on the fly.
NOTE: All transition effects require AppCenter Pro licensing.
To add an on-the-fly pause or transition to a playlist:
1. With the playlist open, select Playlist | Options and select the Go To tab.
2. Select the desired transition, and click OK .
NOTE: Check specifications for limitations on the transition length.
When you use the Go To feature to skip from one event, the transition takes effect.
Related Topics
Transition effects formats and limitations on page 259
To remove pause from all events in a section
To remove pauses at the end of all section events:
1. Select the section.
2. Open the properties dialog box by doing one of the following:
• Click the Properties button.
• Right-click on a section and select Properties .
3. Click All Events .
4. Select the Change event pauses check box, then choose the Remove all pauses option.
5. Click OK .
Pauses are removed from all events in the section. The section now plays without pausing between
any events.
Adding GPI output triggers to playlists
You can assign GPI output triggers to events and sections in a playlist. The GPI outputs can be used
to trigger external equipment when the list plays. Before you can use GPI output triggers in a list,
you must use Configuration Manager to assign GPI outputs to a channel that is running the Playlist
application. If you want to play a list that was created on another channel, you must ensure that GPI
triggers assigned to all applicable channels use the same names, otherwise the GPI triggers will not
occur. Using identical GPI naming also allows copying and pasting sections and events between
lists to be played on different channels.
To trigger GPI outputs:
1. Use Configuration Manager to assign GPI outputs to the current Playlist channel by selecting
System | Configuration .
2. Make the changes to the GPI settings.
29 October 2012 K2 AppCenter User Manual 111
Working with playlists