Channelflex suite supported combinations, K2 dyno replay system, 4 in, 2 out – Grass Valley K2 AppCenter v.9.0 User Manual
Page 207
ChannelFlex Suite supported combinations
The overall load on system resources must be considered when using multiple inputs and outputs
per channel on multiple channels, as each input/output stream consumes system resources. FTP
transfers, off-speed play, and media drive rebuilds also consume system resources, so they must be
considered as well. The channel combinations illustrated below are typical applications that maximize
ChannelFlex channels. These combinations have been qualified by Grass Valley, with the following
considerations:
•
These combinations assume an HD format with 100 Mbps data rate, which produces a high load
on system resources.
•
If you use off-speed play above 1x at the same time an FTP transfer is underway, the available
FTP bandwidth can be reduced by as much as 50%.
•
If a media drive rebuild is in progress it can result in a slight reduction in available FTP bandwidth.
K2 Dyno Replay system, 4 IN, 2 OUT
29 October 2012
K2 AppCenter User Manual
207
ChannelFlex Suite