Teac DM-24 - Manual (Page 93)

11 – Machine Control/Location—MIDI controllers
TASCAM DM-24 Reference Manual
93
MIDI controllers
The PODs of the DM-24 can be used to send MIDI
Control Change messages as described here. The most common controllers are listed here, and the
cursor keys and PODs are used to set the values of
these controllers on the selected channel.
The selected channel is shown at the top of the
screen, and is the same as the ID selected on the
setup page.
Control Functions available in this screen are:
MIDI faders
In the MIDI faders screen, the master layer of the
DM-24 faders is used to control MIDI Control
Change values, on the same controller, for all sixteen
MIDI channels: The MIDI Control Change number can be selected
and set in this screen. As the example here shows,
this may be used most often with MIDI volume
(Control Change 7) in order to provide an easy way
of independently controlling the volume of up to 16
MIDI devices connected to the DM-24.
No. Control Function No. Control Function
01 Modulation 64 Sustain
02 Breath 67 Soft
04 Foot 16 Gpc1
11 Expression 17 Gpc2
18 Gpc3
07 Ch.vol 19 Gpc4
08 Balance 5 Porto Time
10 Pan 84 Porto Ctrl
12 Eff Ctrl 99 Non Reg
13 Eff Ctrl 101 Reg