Teac DM-24 - Manual (Page 103)

13 – Library functions—Libraries—effects
TASCAM DM-24 Reference Manual
103
Libraries—effects
When the internal effect library is selected, the
screen display changes as shown below:
This differs from the other libraries, because it is pos-
sible to access four different sub-libraries from a sin-
gle screen.
The settings for the current and the library entry data
effector are displayed on the left and the right of the
screen respectively. In addition, the current effector
setting (either 1 or 2, as determined by the currently-
selected sub-library) also shows the input to and the
output from the effector.
The sub-libraries are:
• Preset entries for effect 1 ( P1 )
• Preset entries for effect 2 ( P2 )
• User entries ( U1 )
To change the sub-library:
1 Use the cursor keys to select the sub-library.
2 Press the ENTER key to select the sub-
library.
Use the normal procedures to store, recall and name
the effector entries.
Preset entries can be recalled, and then edited and
stored in the user sub-library.
Obviously, read-only preset entries cannot be over-
written by user entries.
In addition to the name of the entries stored in the
library, the type of effect is also shown beside the
name. This type is automatically entered when the
Buss links OFF
Buss cuts OFF
Dynamics on/off OFF
Dynamics type COMP
Dynamics parameters
THRESH/RATIO/ATTACK/
RELEASE/OUTGAIN/AUTO-
MAKEUP
0dB/ –
∞:
1 /5ms/5ms/0dB/OFF
Dynamics links OFF (except for ST IN 1 and 2)
Dynamics trigger (not shown
as link is off)
BOTH
Effect in 0dB
Link OFF
Pad level 0dB
Phase switch Normal
Pan gang OFF
Sample delay 0sample
Delay switch OFF
Buss assignments No Assign
Stereo/direct assignments (St:ON)/(Dout:OFF)
Surround assignments (Srnd:ON)/(Sub:OFF)
Cut group No Assign
Fader group No Assign
Snapshot name INITIAL-DATA
Item Value