Teac DM-24 - Manual (Page 63)

TASCAM DM-24 Reference Manual
63
8 – Dynamics processors
The DM-24 includes dynamics processors, which
may be assigned as required throughout the mixing
chain.
These high-quality processors are all digital and
include compressors, gates and expanders.
The processor list comprises:
• Sixteen gate or expander units available for the first
16 input channels
• Thirty-two compressor units for channels 1 through
32
• Six assignable output compressors for the aux
sends, the buss masters and the stereo outputs
In addition, the placement of the compressors may be
controlled so that they affect the signal at different
points in the processing chain.
Turning the processors on and off
When there is more than one processor available for
a module (that is, for channels 1 through 16), the
module screen is used to select whether the gate or
the expander is on or off.
In all module screens, the compressor can be turned
on and off (channels 1 through 16 also allow the
independent turning on and off of the gate/expander).
In the DYNAMICS screen (channels 1 through 16), the
gate or expander can be turned on and off, and the
compressor can also be turned on and off indepen-
dently.
DYNAMICS (input channels 1–16)
The screen accessed by the DYNAMICS key shows
the settings for the currently selected input channel
(as shown by the
SEL indicator).
If the selected channel is linked as part of a stereo
pair, the settings affect both channels.
Pressing the SEL key of another channel (or chan-
nels) will bring up the dynamics settings for that
channel.
Selecting a gate or an expander
The processors are selected using the library func-
tion. If a template, preset or user library entry which
corresponds to a noise gate is selected from the gate/
expander library, the gate parameters appear on
screen. If, on the other hand, an expander library entry is
selected, the expander parameters will appear on
screen.
When the DYNAMICS screen is shown, to change from
a gate to an expander, or vice versa, use the G/E... LIB
soft key to bring up the library screen, and recall a
library entry of the appropriate type.