Channel-to-buss assignments (global), Master settings, Aux 1-2 – Teac DM-24 User Manual

Page 40: Master settings aux 1-2

5 – Setting up the I/O—Channel-to-buss assignments (global)

TASCAM DM-24 Reference Manual

The inputs are chosen in a similar way to the input/
return selection for channels 1 through 24.

The cursor is moved to the “patch cord” linking the
inputs to the digital input (either

D IN1

D IN2

), and

the dial and

ENTER

key are used to change the

“patch” setting.

Channel-to-buss assignments (global)

These may be made either on a central “global”
basis, or individually, channel by channel.

NOTE

Surround modes are treated in a similar, but different,
manner. See “Surround operations” on page 107 for
full details of how to make assignments in surround
mode.

To use the global screen:

With the

SHIFT

indicator off, press the

ASSIGN

key.

Continue to press the

ASSIGN

key, or press

soft key 3 to display the

BUSS

screen.

Use the Ó and Á keys or dial to move the
cursor along the row. The § and ¶ keys
move between the blocks, and the

SEL

indi-

cator of the currently-highlighted channel
lights (if the fader layer containing the chan-
nel is selected).

Alternatively, use the

SEL

keys of the chan-

nels to move the cursor and highlight the
channels on the screen. Channel 1 is high-
lighted here.

Use POD 4 to move the cursor at the right of
the screen to select the buss groups (

1-2

3-4

5-6

and

7-8

), the stereo output (

), direct out

(

DIR

) or

AUX 1-2

(see below).

Press

ENTER

to assign/de-assign the high-

lighted channel to and from the selected
group. The appropriate

ASSIGN

key indi-

cators light and go out as the selections are
made in this way.

Alternatively, if the

SEL

key of the selected

channel is lit (that is, the fader layer of the
selected channel is active), use the dedicated

ASSIGN

keys to change the assignments.

NOTE

Direct output is only possible from channels 1 through
16.

Master settings

The on-screen buttons

ALL CH

(soft key 1) and

ALL CH OFF

(soft key 2) are used to

assign or de-assign all channels from the assignment
highlighted using POD 4.

AUX 1-2

The

AUX 1-2

setting at the bottom of the

POD 4 list does not have a corresponding hardware
key or indicator. It is used to switch a link between
the stereo output and aux 1-2, or aux 1-2 may be
assigned to the stereo outputs. Obviously, only one of
these assignments may be made at one time.

The first of these assignments (stereo to aux 1-2) is
only possible when the

AUX 1-2

POD 4 button is high-

lighted, and when the cursor is on the

module

(bottom right of screen).

The second such assignment (aux 1-2 to stereo) is
possible only when the

AUX 1-2

POD button is not

highlighted, and the cursor highlights the

AUX

mod-

ule (to the left of the

module—lower right).

In either case, press the

ENTER

key. If the other

assignment has been made, a popup message appears

RCA

XLR