Teac DM-24 - Manual (Page 125)

17 – Specifications—Digital audio I/O
TASCAM DM-24 Reference Manual
125
Digital audio I/O
Miscellaneous I/O connections
DIGITAL INPUTS (1, 2) 2 x XLR-type female connectors (input impedance 110
Ω)
2 x RCA pin jacks (input impedance 75 Ω)
AES3-1992 or IEC60958 data format (automatically detected)
24-bit word length
Switchable sampling frequency conversion available
DIGITAL OUTPUTS (1, 2) 2 x XLR-type male connectors (output impedance 110 Ω
2 x RCA pin jacks (output impedance 75
Ω)
AES3-1992 or IEC60958 data format (software selectable)
24-bit word length
TDIF-1(1, 2, 3) 3 x 25-pin D-sub connectors (metric lock screws)
Conform to TDIF-1 standard
24-bit word length
ADAT IN/OUT 2 x “Lightpipe” optical connectors
Conform to ADAT OPTICAL specifications
24-bit word length
Sampling frequencies Internal 44.1kHz/48kHz, 88.2kHz/96kHz (high sampling frequencies)
External ±6.0%
WORD SYNC IN BNC connector
Switchable 75
Ω termination
TTL level
WORD SYNC OUT/THRU BNC connector
Switchable between through and output
TTL level
MIDI IN, OUT, THRU/MTC OUT 3 x 5-pin DIN connectors—conform to MIDI specifications
TIME CODE IN RCA pin jack
Conforms to SMPTE specifications
DTRS REMOTE OUT 15-pin D-sub male (metric lock screws)
Conforms to DTRS SYNC standard
EXT SW 1/4” mono jack
TO METER 25-pin D-sub connector (non-metric lock screws)
For use with the optional MU-24/DM
RS-422 (for Sony 9-pin) 9-pin female D-sub connector (non-metric lock screws)
wired to RS-422 standards
GPI (for Machine start) 9-pin female D-sub connector (non-metric lock screws) wired for GPI control
Pin 1=GPI1, Pin 2=GPI2, Pin 3=GPI3, Pin 4=GPI4, Pin 5=GPI5, Pin 6=GPI6,
Pin 7=GPI7, Pin 8=GPI8, Pin 9=ground