QuickLabel Vivo! Touch - Manual (Page 85)

Printer Settings
Vivo! Touch User Guide 71
Setting up Power Saving Mode
When the printer is in power saving mode, the fuser consumes less power. You can
specify the amount of idle time to wait before the printer enters power saving mode.
You can also disable power saving mode.
Note: When the printer enters power saving mode, internal fans will activate and cool the
fuser.
The printer will exit power saving mode when a job is printed or the touchscreen is
used.
1
Touch
System > Misc
on the touchscreen.
Behavior Cut Position 0
Low Toner Action Do Nothing
System Overrides None
Alarms None
Display Language English
Label Counter Off
Brightness 9
Units Inches
Time Date Format MM-DD-YYYY
Time Format hh:mm:ss(12hr)
Sound Internal Speaker Enabled
External Speaker Enabled
Volume 5
Key Click Off
Connection Connection Mode USB
TCP/IP Setup Connection Type DHCP
Baseline Horizontal Baseline Off-
set 0
Vertical Baseline Offset 0
Tab Setting Default