QuickLabel Vivo! Touch - Manual (Page 77)

Printer Settings
Vivo! Touch User Guide 63
Overriding commands is useful when you want to use a setting on the printer rather
than the corresponding setting in the label job.
For example, by default the print speed specified in a Custom QuickLabel print job will
be used instead of the speed selected on the printer. If you enable the override print
speed option, the speed on the printer will always be used, regardless of the print
speed specified in Custom QuickLabel.
1
Touch
Settings > Behavior
on the touchscreen.
2 Check the commands you want to override.
• Print Speed (PS command)
• Vertical Print Offset (PO command)
• Horizontal Print Offset (PR command)
• Media Type (PT command)
Related Topics:
- Selecting a Print Speed on page 60
- Adjusting Horizontal Image Position on page 58
- Adjusting Vertical Image Position on page 59
- Calibrating Media on page 28
Setting up Alarms
1 Touch Settings > Behavior on the touchscreen.
2 Check the alarm types to enable an audio alarm for specific situations.
• Job Start - Sounds the audio alarm when a print job starts.
• Job End - Sounds the audio alarm when a print job ends.
• Job Error - Sounds the audio alarm when an error occurs during a print job.
3 For each enabled alarm type, select an alarm tone. When you select an alarm tone,
an audio sample will be played.