QuickLabel Vivo! Touch - Manual (Page 80)

Printer Settings
66 Vivo! Touch User Guide
2 Select an option from the Label Counter list.
• Off - No counter will be displayed.
• Batch - The quantity of labels printed in the current batch will be displayed.
• Total - The quantity of labels printed since the printer was powered on will be
displayed.
Selecting Display Units
1 Touch System > Display on the touchscreen.
2 Select inches or millimeters as the Units option.
Adjusting the Display Brightness
1 Touch System > Display on the touchscreen.
2 Move the Brightness slider left to decrease brightness, or right to increase
brightness. You can move the slider in two ways:
• Touch and drag the slider left or right.
• Touch anywhere in the slider bar to move the slider toward the touch point.
Calibrating the Touchscreen
1 Touch System > Display on the touchscreen.
2 Choose Calibrate Screen . The touchscreen calibration process will begin.
Follow the on-screen instructions to complete the calibration process.
Note: During calibration, you are prompted to touch targets on the touchscreen. You can
use a stylus to increase the accuracy of calibration.