QuickLabel Vivo! Touch - Manual (Page 73)

Printer Settings
Vivo! Touch User Guide 59
3 Touch the Horizontal buttons or number field to adjust the image horizontal
position. You can adjust the image position up to two inches (50 mm) in the left or
right direction.
In the following illustration, a label is exiting the printer. Note the positive and
negative adjustment directions.
If a print job is in progress, the new settings will be used when printing starts on
the next blank label in the job. Partially printed labels will be finished using the
previous settings. If a print job is not in progress, the new settings will be used
when a new job is printed.
Note: The offsets defined in Custom QuickLabel or the printer driver will override the
position settings on the printer. You can prevent this using the ignore print offset options
in the Behavior tab.
Related Topics:
- Overriding Job Commands on page 62
Adjusting Vertical Image Position
1 Start a print job.
2 Touch Settings > Print on the touchscreen.