QuickLabel Vivo! Touch - Manual (Page 28)

Installation and Setup
14 Vivo! Touch User Guide
Note: When the Windows logo testing, publisher verification, or digital signing warning
messages appear, choose to continue the installation. These messages indicate that the driver has
not been “logo tested” by Microsoft. However, it has been tested thoroughly by QuickLabel
Systems, and will not cause any of the problems listed in these messages.
1 Ensure the Vivo! Touch is not connected to your computer via the USB cable.
2 Touch Network/USB > Connection on the touchscreen.
3 Choose the USB connection mode. Choose Home to return to the home screen.
4 Power on your computer and insert the Vivo! Touch Installer CD in the CD drive.
The Installer CD menu will open. Choose
Install/Uninstall Driver .
Note: If the autorun program does not start automatically, use Windows Explorer to
launch the “Setup.exe” file located in the root level of the CD.
5 Use the driver installation wizard to install the driver. Refer to the following
information during this process.
• Choose the USB connection method when prompted.
Choose Finish in the installation wizard after successfully installing the driver.