QuickLabel Vivo! Touch - Manual (Page 32)

Installation and Setup
18 Vivo! Touch User Guide
2 Power on your computer and insert the Vivo! Touch Installer CD in the CD drive.
The Installer CD menu will open. Choose
Install/Uninstall Driver .
Note: If the autorun program does not start automatically, use Windows Explorer to
launch the “Setup.exe” file located in the root level of the CD.
3 Use the driver installation wizard to install the driver. Refer to the following
information during this process.
• Choose the Ethernet connection method when prompted.
• Enter the IP address of the Vivo! Touch. Do not use leading zeros in the IP
address or errors may occur.
• If necessary, you can change the printer name as it will be displayed in
Windows.
• If necessary, you can set the Vivo! Touch as the Windows default printer.
Choose Finish in the installation wizard after successfully installing the driver.
4 Disable advanced printing features in the driver.
• In Windows XP, choose Start > Printers and Faxes .
• In Windows Vista, choose Start > Control Panel > Printers .
• In Windows 7, choose Start > Devices and Printers .
• In Windows 8, access the Search option by pointing to the upper-right corner
of the screen. Search for "Control Panel" and click the Control Panel icon. In
the Control Panel window, click View Devices and Printers .
Right-click the printer icon and choose to view the printer properties. Select the
Ports tab. Ensure the new port is listed and checked.
Select the Advanced tab. Uncheck the Enable advanced printing features option
and choose OK .
Related Topics:
- Uninstalling the Printer Driver on page 18
Uninstalling the Printer Driver
Computers can have corruption problems with system software like drivers. This is
often indicated by erratic printer behavior, color problems, or inability to save settings.
One of the easiest ways to correct this is to remove and reinstall the driver.
If QuickLabel Technical Support instructs you to remove and reinstall the driver, we
will help you through the process.
1 Unplug USB and Ethernet cables from the printer.
2 Power on your computer and insert the Vivo! Touch Installer CD in the CD drive.
The Installer CD menu will open. Choose
Install/Uninstall Driver .
Note: If the autorun program does not start automatically, use Windows Explorer to
launch the “Setup.exe” file located in the root level of the CD.