QuickLabel Vivo! Touch - Manual (Page 16)

Safety Information
2 Vivo! Touch User Guide
• Your printer has a grounded, three-prong plug as a safety feature. This plug only
fits into a grounded outlet. If the plug does not fit, the outlet may be an older,
non-grounded type. Contact an electrician to have the outlet replaced. Do not use
an adapter to defeat the grounding.
• Install the printer near an easily accessed power outlet.
• Avoid damaging the power cord. Do not put anything on it or place it where it will
be walked on. If the cord becomes damaged or frayed, replace it immediately.
• Do not poke anything into the ventilation slots of the printer. You could get an
electrical shock or cause hazardous electrical arcing, which could cause a fire.
• Aside from the routine maintenance described in the documentation, do not try to
service the printer yourself. Removing the cover may expose you to shocks or
other hazards.
• Do not make any adjustments other than those outlined in the documentation. You
may cause damage that will require extensive repair work.
If anything happens that indicates that your printer is not working properly or has
been damaged, unplug it immediately and follow the procedures in the provided
documentation for having your printer serviced.
Here are some of the things to look for:
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the printer, or the printer has been exposed to water.
• The printer has been dropped, or the cabinet is damaged.
• The printer does not function normally when you are following the operating
instructions.