QuickLabel Vivo! Touch - Manual (Page 29)

Installation and Setup
Vivo! Touch User Guide 15
6 Connect the smaller end of the USB cable to the Vivo! Touch USB type B port. The
type B USB port is located on the right side in the following illustration.
Connect the larger end of the USB cable to an available USB 2.0 port on your
computer.
Once the USB connection is made, the installer will automatically add the Vivo!
Touch to the Printers and Faxes window or Devices and Printers window.
7 Disable advanced printing features in the driver.
• In Windows XP, choose Start > Printers and Faxes .
• In Windows Vista, choose Start > Control Panel > Printers .
• In Windows 7, choose Start > Devices and Printers .
• In Windows 8, access the Search option by pointing to the upper-right corner
of the screen. Search for "Control Panel" and click the Control Panel icon. In
the Control Panel window, click View Devices and Printers .
Right-click the printer icon and choose to view the printer properties. Select the
Ports tab. Ensure the new port is listed and checked.
Select the Advanced tab. Uncheck the Enable advanced printing features option
and choose OK .
Related Topics:
- Uninstalling the Printer Driver on page 18
Network Installation
This section describes setting up the Vivo! Touch in a network environment. It assumes
basic familiarity with networking concepts and procedures.
For detailed information about the topic of networking, refer to documentation
applicable to your network environment and/or contact your network administrator.