QuickLabel RW-P1 - Manual

THREE-YEAR LIMITED WARRANTY
Your new RW-P1 or RW-P2 Label Rewinder (the Unit) is guaranteed to the
original end-user purchaser to be free from defects in materials and workmanship
under normal use for a period of three (3) years from original date of purchase.
(The AC power supply warranty period is one 1 year.) This Warranty begins when
you purchase the Unit and continues for the Warranty period unless you sell or
rent the Unit, in which case the Warranty terminates.
In the event Warranty service is required, please contact QuickLabel Systems for
a Return Material Authorization (RMA) number and the location to which the Unit
should be shipped. The Unit must be packed securely for shipment to avoid
damage. Original packaging is recommended if available. Proof of original
purchase must accompany the Unit. The customer assumes all costs incurred in
transporting the Unit to an authorized service center. Upon examination, if the
Unit is found to be defective, it will be repaired or replaced without charge during
the Warranty period.
QuickLabel Systems disclaims any implied warranty, including the warranty of
merchantability and the warranty of fitness for any particular purpose, and as-
sume no responsibility or liability for any special, incidental or consequential
damages.
This Warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, connection to inappropriate power source, lack
of reasonable care, unauthorized modification, the affixing of any attachment not
provided by QuickLabel Systems, or loss of parts. This Warranty is voided in the
event any unauthorized person opens, alters, or attempts to repair the Unit.
QuickLabel Systems
an Astro-Med, Inc. Product Group
World Headquarters:
600 East Greenwich Avenue
West Warwick, RI 02893
Toll Free:
877-757-7978
Telephone: 401-828-4000
Fax: 401-822-2430
E-mail: [email protected]
Website: www.QuickLabel.com
RW-P1 Label Rewinder 120V 60Hz
RW-P2 Label Rewinder 220-240V 50Hz
The QuickLabel Systems RW-P1 and RW-P2 are low-cost Universal Label Rewinders
capable of rewinding or unwinding any width labels up to 4.5” (114mm) wide at
speeds of up to 10-inches per second. Label rolls up to 8” (203mm) in diameter can
be accommodated. No speed adjustments are required. Torque (Rewind Force) is
switch adjustable. The RW-P1 or RW-P2 (The Unit) is bi-directional and rated for
continuous duty. No damage will occur even if The Unit is left “ON” indefinitely after
the printer has stopped. A switch on the Power Supply Module conveniently controls
the amount of rewind or unwind force. The Unit automatically adjusts itself to your
printer speed and allows for back feeding labels if the printer requires this.
The Unit uses proprietary Constant Adjustable Torque™ (“CAT”) technology to
achieve impressive, reliable performance at an unprecedented low price.
Labels can be conveniently wound directly onto the takeup shaft with The Unit
eliminating the need for cardboard rewind cores. Fins to hold a 3” core are also
included. The Unit is supplied with an inner label flange to keep the edge of the
labels aligned as they are being rewound. Rugged, heavy-duty steel construction
allows The Unit to be simply set in place near the exit path of the label printer.
Special anti-slip feet prevent the unit from moving.
UNPACKING
Verify contents of the shipping container:
____
RW-P1 or RW-P2 Unit
____ 120VAC or 220-240VAC Power Supply Module
____ Plastic Bag containing (1) Allen Wrench, (3) Metal Fins, (6) Slotted Screws,
(1) Hook-shaped Bail, (6) Lockwashers in bag, and the User Manual
(this document).
Please keep the shipping container and inserts for future use in case the unit is to be
shipped or moved to a new facility.
WARNING!
This equipment is for indoor use only.
Not for use in wet locations.