Comtech EF Data SNM-1010L - Manual (Page 98)

SNM-1010L Data/Control Modem Revision 0
Front Panel Operation MN/SNM1010L.OM
TX TERR INTERFACE
RS422
Displays the TX TERR Interface type RS-232, RS-422, or V.35.
3.4.5.6.4 UTILITY:INTERFACE:RX TERR INTERFACE
RX TERR INTERFACE
RS422
Displays the RX TERR Interface type RS-232, RS-422, or V.35.
3.4.5.6.5 UTILITY:INTERFACE:BUFFER PROGRAM
BUFFER PROGRAM
BITS
Buffer unit program function. Select MILLI-SECONDS or BITS.
Note: To have the modem calculate the plesiochronous shift, set the buffer units to MILLI-
SECONDS. For a specific buffer depth, set the buffer units to BITS.
3.4.5.6.6 UTILITY:INTERFACE:FRAMING STRUCTURE
FRAMING STRUCTURE
T1 FRAMING
STRUCTURE: G.704
E1 FRAMING
STRUCTURE: G.704
Displays the currently selected framing type and structure of the data. This function is used
with the buffer program in ms for plesiochronous buffer slips.
3–50