Comtech EF Data SNM-1010L - Manual (Page 224)

SNM-1010L Data/Control Modem Revision 0
Remote Control Channel Commands/Responses MN/SNM1010L.OM
A.8.1 Bulk Consolidated Analog Status
Bulk Consol. Analog
Status Status:
Response:
MC BCAS_'cr'
BCAS_p1,p2,p3, . . . pn'cr''lf'] This command is similar to the 'BCS_' command,
but returns modem analog parameters. Additional
status of new options and features will always be
appended to the end.
Where 'pn' is the last parameter returned.
Parameter
Number Parameter Name
(Command Reference)
Description
1
2
3
4
5
6
7
8
Receive Signal Level
(ref. 'RSL_' command).
Raw BER
(ref. 'RBER_' command).
Corrected BER
(ref. 'CBER_' command).
Interface Read Error Status
(ref. 'IRES_' command).
EB/N0
(ref. 'EBN0_' command).
Buffer Fill Status
(ref. 'IBFS_' command).
LNB Current
(ref. LNBC_’ command).
ODU Current
(ref. ODUC_’ command). p1 = xsnn.n, receive signal level in dBm.
p2 = xm.mE-ee.
p3 = xm.mE-ee.
p4 = tttt_xm.mE-ee.
p5 = xnn.n, EB/N0 in dB.
p6 = nn%, buffer fill status.
P7 = nnn, LNB Current
P8 = nnnn, ODU Current
Note: Parameters 2 through 6 are dependent on carrier acquisition, if the decoder is not locked empty data blocks are returned (,,,,,).
A–26