Comtech EF Data SNM-1010L - Manual (Page 64)

SNM-1010L Data/Control Modem Revision 0
Front Panel Operation MN/SNM1010L.OM
3.4.1.2.9 CONFIGURATION:DEMODULATOR:SWEEP RANGE
SWEEP RANGE
30000 HZ
Displays the overall travel of the sweep width range during acquisition in the directed
sweep mode. The sweep width may be set from 0 to 1000000 Hz.
When set at 30000 Hz, the modem is in Normal acquisition mode. The smaller the range,
the faster the modem will lock, provided the receive carrier center frequency is within the
RX-IF frequency sweep range.
3.4.1.2.10 CONFIGURATION:DEMODULATOR:REACQUISITION
REACQUISITION
0 SECONDS
Displays the sweep reacquisition mode time duration. This is the time that the modem
will remain in a narrow sweep after loss of acquisition. After this timer runs out, the
modem will return to the normal acquisition sweep. The reacquisition time is 0 to 999
seconds.
3.4.1.2.11 CONFIGURATION:DEMODULATOR:LNB POWER
LNB POWER
OFF
Displays the LNB Power status, either On or Off.
Upon entry, the LNB Power status is displayed. Press [
↑ ] or [↓ ] change the assigned
filter. Press to execute the change.
3–16