Comtech EF Data SNM-1010L - Manual (Page 28)

SNM-1010L Data/Control Modem Revision 0
Introduction MN/SNM1010L.OM
1.5 Modulator Specification
Parameter Remarks
Output Frequency 950 to 1750 MHz, in 100 Hz steps
Output Power 0 to –40 dBm, in 0.1 dB steps with ± 1.5 dB accuracy
Output Stability ± 0.5 dB
Output Spurious in 4 kHz band
(measured with modulated
carrier) < -55 dBc, 55 to 2000 MHz
Output Phase Noise < -63 dBc/Hz @ 100 Hz
< -73 dBc/Hz @ 1 kHz
< -83 dBc/Hz @ 10 kHz
< -93 dBc/Hz @ 100 kHz
Output Impedance, Return Loss 50 Ω ≥ 14 dB
Output Connector Type N (Female)
Output Spectrum IESS-308/309. EFData Closed
Spectral Sense Normal or Inverted
Data Clock Source Internal or External
Internal Stability ± 0.02 ppm
Outdoor Reference (Center
conductor of IF output connector) On or Off, 10 MHz ± 0.02 ppm @ 0 dBm ± 0.3 dB
dBc/Hz
Frequency Offset
-50 1 Hz
-80 10 Hz
-110 100 Hz
-140 1kHz
-150 10 kHz
-150 100 kHz
Outdoor Unit M&C FSK TX and RX for M&C of the SierraCom or Herley BUC.
Outdoor Unit DC Voltage
(From IF output connector) On or Off (with optional ODU voltage):
24 VDC, 4.0 amps max, universal AC input , 100W
48 VDC, 3.0 amps max, universal AC input, 150W
Outdoor Unit Current Min/Max programmable current limit and alarm if current falls
outside the programmable threshold.
1–8