Comtech EF Data SNM-1010L - Manual (Page 57)

SNM-1010L Data/Control Modem Revision 0
Front Panel Operation MN/SNM1010L.OM
3.4.1.1.4 CONFIGURATION:MODULATOR:TX POWER LEVEL
TX POWER LEVEL
-20.0 dBm
Displays the modulator output level from:
• 0.0 to –40.0 dBm
Upon entry, the current output power level is displayed with the flashing cursor on the
first character. Press [
← ] or [→] to move the flashing cursor, and [↑ ] or [↓ ] to increase
or decrease the digit at the flashing cursor. Press to execute the change.
3.4.1.1.5 CONFIGURATION:MODULATOR:SCRAMBLER
SCRAMBLER
ON
Displays the scrambler status, either On or Off.
3.4.1.1.6 CONFIGURATION:MODULATOR:DIFF. ENCODER
DIFF. ENCODER
OFF
Displays the differential encoder status, either On or Off.
3.4.1.1.7 CONFIGURATION:MODULATOR: CARRIER MODE
3–9