Utility:system:demo mode, Utility:system:ext agc: max pwr, Utility:system:ext agc: min pwr – Comtech EF Data SNM-1010L User Manual
Page 105
SNM-1010L Data/Control Modem
Revision 0
Front Panel Operation
MN/SNM1010L.OM
FPGA FIRWARE
FW/NNNNNN-DDR
Displays the FPGA module FW/9330 firmware version.
The display includes the month, day, and year.
3.4.5.8.13 UTILITY:SYSTEM:DEMO
MODE
DEMO MODE
OFF
Displays the Demo Mode On or Off.
3.4.5.8.14 UTILITY:SYSTEM:EXT AGC: MAX PWR
EXT AGC: MAX PWR
0.0 VOLTS
Sets the AGC voltage for a receive signal level of -60.0 dBm. The voltage range is 0.0 to
10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [
↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press [ENTER] to execute the
change.
3.4.5.8.15 UTILITY:SYSTEM:EXT AGC: MIN PWR
EXT AGC: MIN PWR
10.0 VOLTS
The voltage range is 0.0 to 10.0V, in 0.5V steps.Upon entry, the current external AGC
voltage level is displayed. Press [
↑] or [↓] to increment or decrement the AGC voltage
level in 0.5V steps. Press [ENTER] to execute the change.
3–57