Comtech EF Data SNM-1010L - Manual (Page 87)

SNM-1010L Data/Control Modem Revision 0
Front Panel Operation MN/SNM1010L.OM
• Filter Types
• Terrestrial Interface Types
• Mod/Demod Types
• Time/Date
• Encoder/Decoder Types
• Modem Types
• Current Firmware
• Test Mode Status
• Overhead Type
• Revision Emulation
• Lamp Test
Provisions are also made for assigning data and code rates to the modulator and
demodulator.
After entering the Utility menu, press [
←] or [→] to select the desired sub-menu, and
press [ENTER].
Notes:
1. The Utility Factory Setup menu is for Comtech EF Data service personnel only.
Entering this menu without authorization may cause the modem to operate
incorrectly.
2. Changes in the Utility menu may cause changes in other front panel menus.
3.4.5.1 FUNCTION SELECT:UTILITY:MODULATOR
UTILITY
MODULATOR
3–39