Comtech EF Data SNM-1010L - Manual (Page 92)

SNM-1010L Data/Control Modem Revision 0
Front Panel Operation MN/SNM1010L.OM
ODU ALARM - LOW
0 mA
Alarm is operational below 0.0 mA. Press [
←], [→], [↑], or [↓] to move the flashing
cursor. Press [ENTER] to execute the change.
3.4.5.4.9 UTILITY:MODULATOR:ODU ALARM - HIGH
ODU ALARM - HIGH
2000 mA
Alarm is operational above 2000 mA. Press [
←], [→], [↑], or [↓] to move the flashing
cursor. Press [ENTER] to execute the change.
3.4.5.4.10 UTILITY:MODULATOR:RF MODE CONTROL
RF MODE CONTROL
NORMAL
RF Mode Control is selectable from: Normal, Power, COMM, or Carrier Detect.
RF output Control during power cycle.
3.4.5.4.11 UTILITY:MODULATOR:TX SYMBOL RATE
TX SYMBOL RATE
19.200 KSPS
Status Only.
3–44