Comtech EF Data SNM-1010L - Manual (Page 130)

SNM-1010L Data/Control Modem Revision 0
User Port Operation MN/SNM1010L.OM
4.3.14 Echo (ECHO)
This command enables/disables echo of characters sent to the SNM-1010L user port.
4.3.14.1 Command Format
ECHO ‘ON’ enables character echo
‘OFF’ disables character echo
4.3.14.2 Local Command Responses
ECHO
4.3.15 Modem Command Sequence
This command permits the use of the User Port to communicate with the SNM-1010L
using M&C commands similar to those used for the SDM-300L base modem.
Refer to Appendix A, Remote Control Specification, for a subset of M&C remote
commands that may be useful to the SNM-1010L.
4.3.15.1 Command Format (MC)
MC 'modem command string''cr'
Prefix channel number. (Optional)
Valid range: 0 (or omitted)
MC The command string following the 'MC' command is issued directly to the
SNM-1010L. Refer to Section 9.0.
4.3.15.2 Local Command Responses
>1/’response’’cr’
4–12