Comtech EF Data SNM-1010L - Manual (Page 61)

SNM-1010L Data/Control Modem Revision 0
Front Panel Operation MN/SNM1010L.OM
3.4.1.2.1 CONFIGURATION:DEMODULATOR:CODE/DATA RATE
RX-V QPSK 1/2
19.200 kbps
Filter: A, B, C, D, and V.
Code Rate Data Rate Range Remarks
BPSK 1/2 2.4 to 1250 kbps
{O}QPSK 1/2 4.8 to 2500 kbps Turbo & Non-Turbo
{O}QPSK 3/4 7.2 to 3750 kbps Turbo & Non-Turbo
{O}QPSK 7/8 8.4 to 4375 kbps
8PSK 2/3 64 to 5000 kbps
BPSK 1/1 4.8 to 2500 kbps Turbo & Non-Turbo
{O}QPSK 1/1 9.6 to 5000 kbps Turbo & Non-Turbo
BPSK 5/16 2.4 to 781.25 kbps Turbo only
BPSK 21/44 2.4 to 1193 kbps Turbo only
8PSK 3/4 384 to 5000 kbps Turbo only
Notes:
1. Max Symbol Rate: 2500 kbps.
2. Max Data Rate for Low Var Rate: 512 kbps
Upon entry, the current transmitter rate is displayed. Press [ ↑ ] or [↓ ] change the
assigned filter. Press to execute the change.
3.4.1.2.2 CONFIGURATION:DEMODULATOR:RX-IF FREQUENCY
RX-IF FREQUENCY
1200.000000 MHZ
Displays the demodulator receive frequency, between 950 to 1750 MHz, in 100 Hz steps.
The DAC sets this from the ICF setting. Refer to paragraph 4.3.5.
Upon entry, the RX-IF Frequency is displayed. Press [
↑ ] or [↓ ] change the assigned
filter. Press to execute the change.
3–13