Function select:monitor:lnb voltage, Function select:monitor:odu current, Function select:monitor:odu voltage – Comtech EF Data SNM-1010L User Manual
Page 75
SNM-1010L Data/Control Modem
Revision 0
Front Panel Operation
MN/SNM1010L.OM
3.4.2.8 FUNCTION SELECT:MONITOR:LNB VOLTAGE
LNB VOLTAGE
LNB POWER OFF
Displays the current LNB Voltage, either 0 to 48 VDC, or LNB POWER OFF.
Upon entry, the status is displayed. Press [
↑] or [↓] to make the selection. Press [ENTER]
to execute the change.
3.4.2.9 FUNCTION SELECT:MONITOR:ODU CURRENT
ODU CURRENT
ODU POWER OFF
Displays the current ODU Current, either 0 to 500 mA in 1 mA steps, or ODU POWER
OFF.
Upon entry, the status is displayed. Press [
↑] or [↓] to make the selection. Press [ENTER]
to execute the change.
3.4.2.10
FUNCTION SELECT:MONITOR:ODU VOLTAGE
ODU VOLTAGE
ODU POWER OFF
Displays the current ODU Voltage, either 0 to 48 VDC, or ODU POWER OFF.
Upon entry, the status is displayed. Press [
↑] or [↓] to make the selection. Press [ENTER]
to execute the change
3–27