Comtech EF Data SNM-1010L - Manual (Page 124)

SNM-1010L Data/Control Modem Revision 0
User Port Operation MN/SNM1010L.OM
4.3.5 Receive Control Channel Frequency (ICF)
This command sets the receive (NMS to remote) control channel IF frequency at the
remote node.
4.3.5.1 Command Format
ICF 'cr'
Entered in MHz.
Range of 950 to 1750 MHz
Resolution of 100 Hz.
Formatting is pseudo-floating point.
Example :
ICF 1078.4567 sets receive control IF frequency to 1078.4567 MHz.
4.3.5.2 Local Command Responses
ICF= , ,
4.3.6 Transmit Control Channel Frequency (OCF)
This command sets the transmit (remote to NMS) control channel IF frequency at the
remote node.
4.3.6.1 Command Format
OCF 'cr'
Entered in MHz.
Range of 950 to 1750 MHz
Resolution of 100 Hz.
Formatting is pseudo-floating point.
Example :
OCF 1078.1234 sets transmit control IF frequency to 1078.1234 MHz.
4.3.6.2 Local Command Responses
OCF= , , offset>
4.3.7 Transmitter On (RF_ON)
4–6