beautypg.com

Utility:demodulator:rx terminal lo (future option), Default: +0.0 mhz. refer to paragraph 3.4.7, Utility:demodulator: demodulator type – Comtech EF Data SNM-1010L User Manual

Page 94: Utility:demodulator:decoder type

background image

SNM-1010L Data/Control Modem

Revision 0

Front Panel Operation

MN/SNM1010L.OM

3.4.5.5.2

UTILITY:DEMODULATOR:RX TERMINAL LO (FUTURE OPTION)

RX TERMINAL LO

0 MHZ MIX:-

Default: +0.0 MHz. Refer to paragraph 3.4.7.

3.4.5.5.3

UTILITY:DEMODULATOR: DEMODULATOR TYPE

DEMODULATOR TYPE

INTELSAT OPEN


Transmit filter type select. Select one of the following for network filtering:

Note:
Change in EFD, ASYNC, or Custom modem types only.

INTELSAT OPEN FDC

CLOSED

EFD CLOSED

SDM-51 COMPATIBLE

CSC CLOSED

Note: TX filter type is selectable only when CUSTOM is selected for the modem type in
the Utility Modem Type menu.

3.4.5.5.4 UTILITY:DEMODULATOR:DECODER

TYPE

DECODER TYPE

VITERBI


Decoder type selection. Select VITERBI, SEQUENTIAL, or TURBO decoder type.

Notes:

1. Change in EFD, ASYNC, or Custom modem types only.
2. A Sequential Decoder Type and a 3/4 Code Rate combination is

not compatible with a CSC CLOSED Modulator Type.


Press[

←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the

change.

3–46

This manual is related to the following products: