29 snmp-server community mode, 29snmp-server community mode – Pilz PSSnet SHL 8T MRP User Manual
Page 97

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
97
4.4.29 snmp-server community mode
This command activates an SNMP community. If a community is enabled, an
SNMP manager associated with this community manages the switch accord-
ing to its access right. If the community is disabled, no SNMP requests using
this community are accepted. In this case the SNMP manager associated
with this community cannot manage the switch until the Status is changed
back to Enable.
Default
The default private and public communities are enabled by default.
The four undefined communities are disabled by default.
Format
snmp-server community mode <name>
Mode
Global Config
U
no snmp-server community mode
This command deactivates an SNMP community. If the community is
disabled, no SNMP requests using this community are accepted. In this
case the SNMP manager associated with this community cannot
manage the switch until the Status is changed back to Enable.
Format
no snmp-server community mode <name>
Mode
Global Config