Pilz PSSnet SHL 8T MRP - Manual (Page 77)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
77
4.4.4 bridge fast-link-detection
This command enables or disables the Bridge Fast Link Detection.
Default
Enabled
Format
bridge fast-link-detection {disable|enable}
Mode
Global Config
4.4.5 bridge vlan-learning
With ”independent” you set the Shared VLAN Learning mode to Indepen-
dent. The switch will treat equal MAC source addresses from different VLANs
as separate addresses.
With ”shared” you set the Shared VLAN Learning mode to Shared. The
switch will treat equal MAC source addresses from different VLANs as the
same adress.
Format
bridge vlan-learning {independent|shared}
Mode
Global Config
4.4.6 ethernet-ip
This command controls the EtherNet/IP function on the switch.
Detailed information you can find in the User Manual Industrial Protocols.