Pilz PSSnet SHL 8T MRP - Manual (Page 286)

CLI Commands: Switching
286
5.2 MRP
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.2.4 mrp current-domain
Specify that you want to configure the current MRP domain's settings.
Default
none
Format
mrp current-domain {advanced-mode {disable|enable}
| manager-priority <0-65535>
| mode {client|manager} | name
| recovery-delay {500ms|200ms}
| operation {disable|enable}
| port {primary|secondary}
| vlan <0-4042>}
Mode
Global Config
advanced-mode
Enable or disable the switch's advanced mode for the given MRP
domain.
manager-priority
Configure the given MRP domain's manager priority (0-65535).
mode
Configure the switch's MRP mode for the given domain (client or
manager).
client: Switch is client for the given MRP domain.
manager: Switch is manager for the given MRP domain.
name
Set a name for the given MRP domain.
recovery-delay
Configure the MRP recovery delay for the given domain.
500ms: Recovery delay is 500 ms for the given MRP domain.
200ms: Recovery delay is 200 ms for the given MRP domain.
operation
Enable or disable the switch for the given MRP domain.