34 snmp-server enable traps, 34snmp-server enable traps – Pilz PSSnet SHL 8T MRP User Manual
Page 100

CLI Commands: Base
100
4.4 Management Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4.34 snmp-server enable traps
This command enables the Authentication Trap Flag.
Default
enabled
Format
snmp-server enable traps
Mode
Global Config
U
no snmp-server enable traps
This command disables the Authentication Trap Flag.
Format
no snmp-server enable traps
Mode
Global Config
This manual is related to the following products: