Pilz PSSnet SHL 8T MRP - Manual (Page 259)

CLI Commands: Switching
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1 Spanning Tree Commands
259
Topology Change Count
Number of times the topology has changed for this multiple spanning
tree instance.
Topology Change in Progress
Value of the Topology Change parameter for the multiple spanning
tree instance.
Designated Root
Identifier of the Regional Root for this multiple spanning tree
instance.
Root Path Cost
Path Cost to the Designated Root for this multiple spanning tree
instance
Root Port Identifier
Port to access the Designated Root for this multiple spanning tree
instance
Associated FIDs
List of forwarding database identifiers associated with this instance.
Associated VLANs
List of VLAN IDs associated with this instance.
5.1.4 show spanning-tree mst port detailed
This command displays the detailed settings and parameters for a specific
switch port within a particular multiple spanning tree instance. The instance
is a number that corresponds to the desired existing multiple span-
ning tree instance. The is the desired switch port.
Format
show spanning-tree mst port detailed <slot/
port>